The Flueboost fan was developed in the 1970s by the late Simon Cartwright to overcome problematic flue installations due to:. Simon had worked for family heating business, R&S Cartwrights, to size and install commercial boiler systems in many of the banks, offices and warehouses in central Manchester in the late 60s and early 70s.
He saw the potential of the product range and established Flueboost as a separate company which operated alongside R&S Cartwrights until it expanded to its current premises in Knutsford, Cheshire.
He saw the potential of the product range and established Flueboost as a separate company which operated alongside R&S Cartwrights until it expanded to its current premises in Knutsford, Cheshire.
Services
Flueboost is a registered member of ICOM, a division of the Energy and Utilities Alliance - a not-for-profit trade association that represents and promotes the interests of the non-domestic heating sector. Under Managing Director Alison Cartwright, the company assembles its own range of CE-approved, inline boiler and gas-fire fans.
Flueboost has been sizing, sourcing and supplying all types of inline flue fans since the 1970's so have a wealth of knowledge about which product is most suitable for any given application. We stock our own range of inline flue fans together with products from Exodraft & Airflow Developments. Alison worked for many years at R & S Cartwrights alongside Roland, Jean & Simon Cartwright.
The Flueboost Gas Fire model 150 deals with flue gases of up to 200c, this is a guide of maximum temperature and will vary due to size and length of flue. The fan is suitable for fireplaces with a maximum constructional opening of 0.25m2. For optimum working capacity the flue gas velocity should be 2.5 - 4 m/s.
The Flueboost 350 model efficiently deals with flue gasses of up to 300c. This is variable dependant on size and length of flue used. This model is suitable for fireplaces with a maximum constructional opening of 0.5m2. For optimum usage the velocity of the flue gas should be between 2.5 - 4m/s. Contact our staff 01565 755599 so we can confirm the most suitable duct diameter for the installation pre purchase.
The bifurcated axial fan is a cylinder shaped unit with in line flanges for the flue connection; a pressure switch can be fitted to ensure safe operation. All bifurcated fans are individually sized and manufactured to suit a particular flue system, either dilution or induction. Please note that a drain plug may be fitted to the fan in manufacture if the fan is being installed within a condensing system.
Reviews
Be the first to review Flueboost.
Write a Review
